DataDrivenResults

134/120 Blood Pressure Meaning: Category and What To Do

A blood pressure reading of 134/120 mm Hg falls into High Blood Pressure Stage 2 overall. The systolic value of 134 alone is Stage 1, but the diastolic value of 120 is Stage 2, and the more severe category determines the overall classification. Per NHLBI guidance, consistent readings of 130 systolic or 80 diastolic or higher mean your blood pressure is high — talk to your provider.

Editorial Team

What 134/120 mm Hg means

A reading of 134/120 mm Hg combines a systolic pressure of 134 with a diastolic pressure of 120. Under the NIH/NHLBI blood pressure levels table, the systolic value of 134 falls into the High Blood Pressure Stage 1 range, while the diastolic value of 120 falls into the High Blood Pressure Stage 2 range. When the two numbers land in different categories, the higher category applies, so the overall classification for 134/120 mm Hg is High Blood Pressure Stage 2.

How each number is classified

The two components of the 134/120 reading are classified separately, and the overall category follows the more severe of the two. The table below shows how each part of this reading maps to the NHLBI levels.

ComponentValueCategory
Systolic134 mm HgHigh Blood Pressure Stage 1
Diastolic120 mm HgHigh Blood Pressure Stage 2
Overall134/120 mm HgHigh Blood Pressure Stage 2

In this case the diastolic number of 120 is the decisive factor, pulling the overall classification up to Stage 2 even though the systolic number of 134 would only indicate Stage 1 on its own.

What to do about a 134/120 reading

According to the NHLBI, your blood pressure is considered high when you have consistent systolic readings of 130 mm Hg or higher, or diastolic readings of 80 mm Hg or higher. Both numbers in the 134/120 reading exceed those thresholds — the systolic value exceeds 130 and the diastolic value far exceeds 80 — so the recommended action is to talk to your provider. A single reading is not a diagnosis; the classification assumes consistent readings at these levels.

Why the diastolic number matters here

The diastolic value of 120 in this reading is unusually high relative to the systolic value of 134, and it is what places the reading in Stage 2 rather than Stage 1. This is an example of why both numbers must be checked independently against the levels table: relying on the systolic value alone would understate the classification. If you repeatedly see a diastolic pressure at or near 120 mm Hg, that pattern is what the NHLBI thresholds flag as high, and it warrants a conversation with your healthcare provider.

Common Questions

Is 134/120 blood pressure high?

Yes. A reading of 134/120 mm Hg is classified as High Blood Pressure Stage 2 overall. The systolic value of 134 is Stage 1 on its own, but the diastolic value of 120 is Stage 2, and the higher category determines the overall result.

Why is 134/120 Stage 2 when the top number is only Stage 1?

The NIH/NHLBI levels table classifies systolic and diastolic values separately. For 134/120, the systolic 134 lands in High Blood Pressure Stage 1 while the diastolic 120 lands in Stage 2. The more severe category — Stage 2 — becomes the overall classification.

What should I do if my reading is 134/120?

The NHLBI states that consistent systolic readings of 130 mm Hg or higher, or diastolic readings of 80 mm Hg or higher, mean your blood pressure is high. Both thresholds are exceeded in this reading, so the guidance is to talk to your provider.

Data source